3/26/2023 0 Comments Ubuntu install tftp serverWe will also assume your tftp root path is /var/lib/tftpboot in the remaining of this article. It is expected to show active (running) from the output messages. If the installation is successful, check the corresponding TFTP service is active by this command: $ systemctl status rvice This article assumes that you have setup your tftp (and/or DHCP/bootp if necessary, depending on your LAN configuration) by following this Ubuntu Discourse post, or you could also consider build your own tftp in this way if your DNS and DHCP is already well configured: $ sudo apt install tftpd-hpa Focal (20.04, 20.04.5) and Groovy (20.10) have been tested with the following method. This process is inpired by this Ubuntu Discourse post for legacy mode, which is UEFI’s predecessor. The process is applicable to both of the architectures, arm64 and amd64. This document provides the steps needed to install an system via netbooting and subiquity in UEFI mode with Ubuntu 20.04 (or later). Netbooting the Live Server Installer via UEFI PXE on Arm (aarch64, arm64) and x86_64 (amd64)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |